

Manufacture of gear pump, gear motor, orbital motor and valves.



dettagli azienda

Manufacture of gear pump, gear motor, orbital motor and valves. [Jiangsu,China] Attività di tipo:fabbricante I mercati principali: Africa , Americas , Asia , caraibico , Europa dell'est , Europa , Medio Oriente , Nord Europa , Oceania , Altri mercati , Europa occidentale , In tutto il mondo esportatore:51% - 60% Karts:ISO9001, CE

Lingua

Gear pump common troubleshooting

June 12, 2019

Cause Analysis of Common Faults of Gear Pump Users

1, the shaft power increased dramatically

Cause: The discharge line is clogged; Serious friction between gear and pump; Medium viscosity is too high

2, pump noise or vibration abnormalities

Reason: pump and motor are not the heart; gears and pumps do not have the same heart or gap; the pump has gas; the installation height is too large, the pump produces cavitation

3, the pump does not absorb oil

Cause: Suction management blockage or air leaks; inhalation height exceeds allowed suction vacuum height; motor reversal; medium viscosity is too large

4, gear pump oil shortage

Cause: Blocked or leaked suction line; Serious wear and tear on gears and pump; Insufficient motor speed; Solenoid valve spring too loose or disc valve and valve seat misaligned

5, pressure gauge pointer fluctuations

Reason: the suction pipe leakage; safety valve is not adjusted or the working pressure is too large, so that when the safety valve open

6, the pump body fever

Cause: Severe pump friction; back to the mechanical seal plug hole; oil temperature is too high

According to the above analysis to find out the reasons to solve the problem

Dscf5048