

Manufacture of gear pump, gear motor, orbital motor and valves.



dettagli azienda

Manufacture of gear pump, gear motor, orbital motor and valves. [Jiangsu,China] Attività di tipo:fabbricante I mercati principali: Africa , Americas , Asia , caraibico , Europa dell'est , Europa , Medio Oriente , Nord Europa , Oceania , Altri mercati , Europa occidentale , In tutto il mondo esportatore:51% - 60% Karts:ISO9001, CE

Lingua

Teach you how to overhaul the hydraulic control valve

September 18, 2019

Hydraulic control valve maintenance methods: Hydraulic control valve is a self-lubricating water valve body, without additional oil lubrication, in case of damage to the main valve parts, please follow the instructions to remove. (Note: The general consumption of damage within the valve products for the diaphragm and o-ring, other internal parts little damage) 1. The main valve before and after the end gate valve closed. 2. Release the pipe fitting screw on the main valve cover to release the pressure in the valve. 3. Remove all screws, including the nuts of the necessary brass in the control line. 4. Take the valve cover and spring. 5. The axis, diaphragm, piston and other removed, do not damage the diaphragm. 6. After the above items are removed, check the diaphragm and ○ ring is damaged; if no damage do not subcontract their own internal components. 7. If it is found that the diaphragm or o-ring is damaged, please loosen the nut on the shaft core, break out the diaphragm or ring by Zhejiang, and then replace it with a new diaphragm or o-ring. 8. A detailed examination of the main valve internal valve seat, shaft and other damage if any other debris in the main valve to clean it out. 9. In reverse order is the replacement of the main components of the valve assembly, pay attention to the phenomenon of the valve can not be jammed. More Keyword Search: Control Valve

prossimo

Contal US

Autore:

Mr. John

E-mail:

john@grhcn.com

Phone/WhatsApp:

+8613905116886